The power line and power supply line should be kept at least 30 cm apart, the power line and signal line should be kept at least 50 cm apart, and the power supply line and signal line should be kept at least 20 cm apart. In order to reduce electromagnetic interference, surge absorbers should be installed around the inverter, and at the same time, it should be ensured that the distance between the power line and power supply line, the power line and signal line, and the power supply line and signal line is greater than 30 cm. When cross-wiring, the wiring should be arranged vertically.
Connection cable length limit
The power line and the power supply line should be kept at least 30 cm apart, the power line and the signal line should be kept at least 50 cm apart, and the power supply line and the signal line should be kept at least 20 cm apart.
Electromagnetic interference control
In order to reduce electromagnetic interference, surge absorbers should be installed around the inverter, and at the same time ensure that the distance between the power line and the power supply line, the power line and the signal line, and the power supply line and the signal line is greater than 30 cm. When cross-wiring, the wiring should be arranged vertically.
Wiring Notes
The connection lines should be as short and non-intersecting as possible. The voltage level of all connection lines must match the voltage level of the frequency converter, and pay attention to the impact of electromagnetic interference.